To connect to the WiFi within the SLC building you need to follow the instructions below: 

1. Find the “SLC-WIFI” or “eduroam” on your phone.
2. Enter your student or staff username when asked for “Identity” or “Username” e.g. studentnumber@slc.ac.uk or studentnumber
3. Enter the same password that you use to log into an SLC computer.
4.  If you have an Android device, select “Use System Certificates” for the “CA Certificate”.
5.  If you have an Apple device, select “Trust” when your shown the certificate screen.
6.  If you have any issues please email - itsupport@slc.ac.uk

In some case the device you have might need additional settings applied, please see the extra settings that you might need to fill in:

Android Devices: including Chromebooks

Once “SLC-WIFI” or “eduroam” is selected from your WiFi settings, please make sure the following settings are applied:

EAP Method - PEAP

Phase 2 Authentication - MSCHAPV2

CA Certificate - Use System Certificates

Online Certificate Status - Do Not Validate

Domain - slc.ac.uk

Identity - your pc username only (studentnumber)

Password - your current pc password

Apple Devices

Once “SLC-WIFI” or “eduroam” is selected from your WiFi settings, please make sure the following settings are applied:

Username - your pc username (studentnumber@slc.ac.uk)

Password - your current pc password

Mode - Automatic

Certificate - Click on Trust